Quick Details
Description
Quick Details
- Place of Origin: China (Mainland)
- Brand Name: Hong Feng
- Model Number: RP HP UHP IRP SHP
- Type: Electrode Block
- Application: chemical metallugical Steelmaking
- Diameter: 75~600mm
- Length: 1700~1900/+/-100mm(60-94")
- Grade: HP (High Power)
- Resistance (μΩ.m): 6.0;5.5
- Apparent Density (g/cm³ ): 1.64;1.73
- Thermal Expansion: 1.5;1.4
- Flexural Strength (N/㎡): 14;18
- Dia: 200~600mm
- Nipple: 4TPI,3TPI, 4TPIL
- Grade: RP/HP/SHP/UHP
- ISO: 9001:2000 STANDARD
Packaging & Delivery
| Packaging Details: |
standard seaworthy packing or as customers' requirment. All wooden pallets are with fumigation |
| Delivery Detail: |
about 30adays after confirm the contract |
Specifications
graphite electrode
1.Diameter: 75mm-600mm
2.Length: 1700~1900/+/-100mm(60-94")
3.ISO9001:2000 STANDARD
4.Nipples: 3TPI,4TPI
.png)
Introduction
Carbon Electrode Paste,as self-baking electrode,is widely used in submerged arc furnaces for delivering power to the hearth,where raw materials will be smelted and mixed with each other.Electrode Paste,either in cylinder or briquette shape,all will be added to the furnace at the top of electrode column.As the paste moves down along the electrode column,the increased temperature will make the paste melt and subsequently bake to be a block of electrically conductive carbon electrode for industrial production. Electrode Paste is essentially a mix of Electrically Calcined Anthracite (ECA),Calcined Petroleum Coke (CPC) and Artificial Graphite with Coal Tar Pitch as a binder.
USE OF GRAPHITE ELECTRODES
Graphite eletrodes should be stored in dry and clean place. To avoid shock and collision. Be sure to dry them up before use.
Clean open socket with compressed air, screw nipple into socket carefully not to damage threads.
Bring down upper electrode until opening between two electrodes becomes 20 to 30mm. Clean out opening between electrodes with compressed air.
When joining electrrodes by torque wrench, be sure to tighten exactly to specified torque.
To avoid electrode breakage, remove any nonelectro conductive material material from furnace.
To avoid electrode breakage, be sure to placelarge scrap at furnace bottom and small scrap at top.