Quick Details
Description
PLBS series pole mounted load break switch is used in power system with 12/24/40.5kv rated voltage, 630A rated current and 50/60Hz. It can automatically isolate the failed section in the distribution line.
It complies with IEC60265, IEC60694, IEC62271, GB 3804 standard.
The switch is equipped with the electric controller of the latest technology. It can be operated by hand, electric motor and remotely. The electric controller is installed in a stainless steel box and suitable for application in various climate conditions. In addition, wired and wireless modems can be installed in the box to realize remote monitor and control. Easy installation on poles reduces the cost.
Surrounding temperature: upper limit ＋50℃, lower limit －40℃
Relative humidity: 100%
Altitude: no more than 3000m
Wind pressure no more than 700pa（equal to wind speed 34m/ｓ）。
Earthquake intensity: 8 degrees
Installation places: no fire, explosive risk, chemical corrosion or frequent severe vibration.
Pollution degree: Ⅲ、Ⅳ
-SF6 gas insulated
SF6 is a kind of electric insulation gas. It is non-poisonous, nonflammable and has good arcing feature.
-Various bushing types
Besides standard porcelain bushings, we can also supply rubber bushings.
-Visible open and close status.
It is easy to see clearly the main contact position indicator ( greenopen, red-close). This indicator is directly connected with main contact drive shaft assembly so that it can show contact status exactly.
-Fast operation
Spring energy storage operating mechanism can quickly open and close (less than 1 second).
-Remote control
Electronic controller is equipped. Users can operate locally, or operate at master station through FTU interface.
- Firm and durable switch
The switch is made of firm, durable and anti-corrosive stainless steel so it has a long service life (30 years) and it is maintenance free. It is an ideal option for pole equipment.
-Standard
Each switch is filled with SF6 gas and is sealed. And it is tested according to IEC60265-1（1988）、GB3804-1990 before delivery.
.jpg)
We TENLEE ELECTRIC GROUP are a professional manufacturer, with four main branches and about 200 partners. We have much experience in test meters, modal test systems, automation and electrical products.
Our company covers an area of more than 2,000 square meters. We have a group of high-quality professional and technical personnel. We have established production and design bases in Hong Kong, Taiwan, Jiangsu and Wenzhou.
Our products, with CE, RoSH, CCC and ISO9001:2000 approvals, are sold in Europe, America, Australia, Japan, and the Middle East. Our products have won good reputations in domestic and international markets.
In order to satisfy customers around the world, we continue the development of new technologies, new materials and new products.
Finally, we hope to have co-development with you.
