Quick Details
Description
- Type:Other
- Place of Origin:Guangdong, China (Mainland)
- Brand Name:ZEUYA
- Model Number:Stock No.958
- Voltage:110V/220V
- Current:/
- Rated Capacity:1300W
- Rated Duty Cycle:50-100%
- Dimensions:400*200*250MM
- Weight:13KG
- Usage:Banner Welding Machine
- Certification:CE ISO
- After-sales Service Provided:Engineers available to service machinery overseas
- Machine Type:1600w tpo welder
- Manufacturer:Yes
- OEM:Accept
- Brand:ZEUYA
- Model:LC-3000A
- Function:Banner Welding
- Operation Way:Manual
- ODM:Accept
- Cetificate:CE Approved
- Warranty:1 Year
Machine Advantage:
This machine is use for weld split PVC, PE and other material can be hot melt. use hot air to melt the material and joint them together. it can move itself in work; with sensor in the welder nozzle, can control the work temperature accurately;
When picture size more than printer printing width, need to split the picture to some part, after print out then weld them together. Usually use 502 glue to joint them by hand, but this way is disadvantageous, like:slowly, after long time the glue is not hard, the glue will dirty picture, work by hand hard to control the quality , etc.
But , Our intelligent banner welder can resolve the problem successfully.
Details as below :
1. No need glue, use hot air to melt the material and joint them together;
2. It can move itself in work; with sensor in the welder nozzle, can control the work temperature accurately;
3. Work temperature, speed, and fan motor speed are adjustable;
4. The body made of steel, very strong;
5. Little dimension : 41*25*20cm, light weight, just 15kg, can bring it to anywhere easily.
Operation procedures :
1). Before hemming or welding, leave 30-40mm wide overlap edge for connection the two disjunct surface pieces, immobilize both ends of each disjunct pieces with something such as stick belt or clamp.
2). Turn on the power, according to quality and thickness of the PVC banner, consider the ground circumstance, set the proper temperature and speed, adjust the suitable hot-air blowing rate, wait for machine hot up around 2 minutes.
3). Bring up the machine, place the rubber wheel at the end of the overlap edge.
4). Turn the handle to left down, insert the welder nozzle into the gap of two overlap pieces, then the machine will moving and seaming automatic.
5). During welding, use the gripe to align the moving direction, let the upper piece edge be in touch with the inner side of the welder nozzle.
6). After the machine go pass the overlap edge to the end, the two disjunct pieces will be joined together, then turn the welder handle to right, it will stop moving.
7). Turn off the heater switch, wait the gun come to cold, then turn off the power supply is ok.
8). Notice: To prolong the electrothermal heater, after work it is strongly advice that cooling the heater at first, then turn off the power 5 minutes later. In case of the power suddenly be off, should handle the welding gun away firstly, and close down the temperature knob, nextly consider the problem of power supply.
9). To get better satisfied bonding effect, the ground of the overlap pieces should be smoothly, hard and heat resistive. We suggest that the operator may do some more test and practice using some samples of the pieces to get the suitable speed and temperature and hot-air blowing rate before operate it for seaming formally.
Shenzhen Zeuya Industry Co., Ltd. has been committed to R&D, production and sales of the plastic welding field ever since its establishment in 1995.
We are professional designer and manufacturer of High Frequency Welding Machine, Ultrasonic Plastic Welding Machine, Blister Forming Machine, Tube Sealing and Filling Machine and other Packing Machine with over 10 years.
We welcome both new and regular customers at home and abroad to visit us and cooperate with us to achieve mutual profits and create a better future. We are convinced that your partnership with us can help your business scale a new high.
