Quick Details
Parameter
Working Pressure : 0.2~0.35Mpa
Membrane Area : According to the model
Flow Rate : 60m3/h
Filter Element Precision : 2,5,10,15,25μm
Voltage : 380V
Anti-hazard Classification : ⅡGrade
Operating Temperature : -10℃~ 70 ℃
End Flange : DN80-DN125
Description
JY-DFF60 Diesel Fuel Filtration Systems/ Water Separators
Model Description:
JY-DFF60 is designed for explosion-proof motor pump unit, its flow rate is 60m³/h
This diesel filtrator that adopting three levels of membrane filtration is large flow rate and high performance, with operating platform.
Application:
JY-DFF60 is especially designed for filtrating diesel, refining diesel and removing impurities, colloid from diesel, especially from emulsified diesel , result in enhancing quality grade of diesel fuel and improving diesel using performance. It is based on characteristics of light diesel oil to adopt high performance wafer membrane filtration technology.
Applicative Oils:
Light diesel oil (Boiling point range of about 180~370 centigrade)
Water separation:
It is applicable to standard diesel oil and emulsified diese (removal of emulsified water), and the separating effect is particularly significant when the oil contained much more water. The separation speed is several or dozens of times than the traditional filtering.
Refinery process:
This product cannot be used in the intermediate process of some small refinery, just as the terminal filtrator to refine the diesel before delivery.
Why do we filter diesel:
Quality and cleanliness of diesel fuel are key factors to guarantee the performance and service life of the engine. The research of the diesel engine manufacturers reported that 90% of the failure problem of diesel engine is due to dirt and moisture in the diesel. Before leaving refinery, diesel is usually clean and up to standard, but after multiple storage and transportation, certain pollution will exist. As a result, the purity of the product will decline. So filtering out the pollutants and water is necessary to restore the purity of the product. Clean diesel makes the rate of engine failure decrease significantly, at the same time, efficiency will be improved, maintenance costs will be cut down, fuel consumption reduces 5-10%, oil-saving effect is obvious, the service life of diesel engines extend 2 ~ 3 times.
Principle:
According to the characteristics of different diesel oils, JY-DFF60 diesel filtrator uses selectivity characteristics of membrane technology to separate impurities and water in diesel fuel. The selectivity characteristic is to say, the oil molecules will pass and water molecules or impurities will be intercepted, so that the oil and water can be separated. Membrane filter has a rigid structure and a high pressure resistance, its membrane thickness between 3 to 16 mm, belonging to depth filtration. The pore in membrane is three-dimensional structure, and pore precision can be controlled within 30μm～0.2μm. That is to say, by back washing the blocked pore, filter element can be used repeatedly. Because of the characteristics of membrane filter element, normal working pressure of equipment is only 0.2-0.3Mpa. Low pressure difference, high flow, high productivity is the distinctive features of this machine.
Functional Characteristics:
High flow diesel purification filtrator
Minimum mechanical flow resistance
Polymer membrane filter element
Depth filtration
High interception rate
Oil-water separation
Quick opening lid, safely and quickly, easy to maintain
Made of high quality thick steel plate, anti-corrosion treatment
Stainless steel tanks can be customized
Tank passes pressure test
With back flush interface, the filter element can be back flushed and maintained
Convenient operation of the drain valve
Convenient repair and maintenance
Low operating cost
Service life is more than 20 years (except for filter element)
Combined function features:
Double filter combinations, three grade filters, two filters can be run independently or combined operation. Different quality in different forms of diesel filtrator : if diesel quality is better and the diesel looks transparent but with impurities, we can run A filter. On the contrary, we can run double filter combination operation (A+B).
JY-DFF60 diesel purification filtrator belong to the large flow rate with 60m³/h. In order to meet much larger flow requirements , we can run several parallel diesel filters operation platform.
The service life of membrane filter element:
Generally, membrane filter element can be used 2 ~ 3 years or longer, if the oil is particularly dirty the service life may be shortened. So in order to increase its service life, we should clean and maintain the membrane filter usually in ordinary time.
The cost of filtration:
Because the service life of membrane filter element is long, high cost-effective, small operation space, low power consumption, filter differential pressure is less than 0.2 ~ 0.3Mpa, simple operation, low comprehensive, low energy consumption, low material consumptions, artificial cost and low maintenance fee, so the total cost is low.
Optional Accessories:
Flow gauge
Water sensor alarm component
Automatic drainage device
Tank insulation heating component (applicable for frigid area).
Application:
Mining, construction, large generating units, engineering machinery,
oil refinery, oil depot, dock, railway locomotive gas stations, military industry,
electric power, oil production and other industries.
Shenyang Jingyuan Membrane Co.,Ltd. is a professional and innovative membrane filter manufacturer,
specialized in clean diesel filter technology ,special membrane production technology, supplying
with high performance and large flow of diesel purification filters and devices, industrial oil
purification device ,high performance military filtration device. We are particularly skilled
in research and application of membrane filtration materials, strict product quality control.
we uphold the proprietary technology and creative and offer you qualified products, competitive price and
professional services. We sincerely hope to promote and develop the business with our friends on the basis of equality
and mutual benefit.
Philosophy: Focus on research and development, continuously innovate product, control quality
in strict, base on equality and mutual benefit
Our factory is located in Tieling Yilu Industrial Park in Liaoning Province, which is also China special vehicle production
base , covers a total area of 28000 square meters with the membrane materials laboratory, production line of special polymer
membrane materials and membrane filter production line. We sell filters to many countries and regions except China.
We supply with the main professional products: high-performance large flow diesel purification filters, diesel-water separator, diesel refining filters, high-precision diesel purification filters, industrial diesel purification filters, industrial oil purification filters,
industrial demulsification water removal for industrial filters, vacuum centrifugal oil filter, wind turbine gear
box oil drain system, matched high viscosity gear oil filter, high viscosity gear oil pre-heater, high performance military filter, polymer membrane materials,and we also engage in filter OEM.
Our company has been approved by ISO9001:2008 quality management system.
Quality: Strictly quality control
Core competence：Membrane materials R & D and production, in the 21st century, membrane technology will
change the world
Production: professional production of large and medium-sized high-performance flow diesel filters and industrial filtration device
