Specifications
IBR roof roll forming machine
1.material thickness:0.4-0.6mm
2.feeding width: 925mm
3.effective width:685mm
IBR roof roll forming machine
This profile are popular used in Africa countrys.
Machine composition:
5Ton*1250mm Hydraulic un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 2.2KW
Link-connect expanding system
Automatic stopping device, Load capacity = Max.5Tons
Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm
Dance arm assistance for coil-turning speed control
Manual Pre-shearing device (Un-powered)
Smart cut control, to cut off the end of the final piece of sheet only
Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;20-step to form
Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated
Shafts Diameter=75mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Forming speed:Approx. 15m/min;
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Pump motor =4.0KW
Cutting tool material : Cr12, Heat treatment;
PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen (SIEMENS), Inverter (SCHNEIDER), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V