• GLOQ1B-I Automatic Transfer Switching

GLOQ1B-I Automatic Transfer Switching

Optimally selecting A power or B power as the main power.

Product Details

Quick Details


GLOQ1B-I type product is a new generation of PC switches adopting coil instant operation. Compared with the traditional switch which adopts motor drive for conversion,it has the advantages of simple structure, fast conversion speed (time<80ms) and so on.In addition, the main contact system is a SPDT (V-type) structure, which will not connect with two powers at the same time even in the emergent situation.



Application range

The rated insulation voltage of the product is 690V, the rated frequency is 50/60Hz,the rated voltage is 400VAC and the rated current is 10A-125A. The product is mainly used for the conversion of emergency power supply system between two powers so as to ensure the important load (for example, firefighting load) can continuously and reliably operate. Mainly used for the nationally specified first-grade current, the product is applicable to the occasions requiring continuous normal power supply such as highrise building, post and firefighting, coalmine and shipping, chemical metallurgy, industrial production line, medical sanitation, military facilities, etc.



Application conditions

◆  Ambient air temperature:
◇ The upper limit shall be not more than +55℃;
◇  The lower limit shall be not less than -25℃;
◇  The maximum daily mean temperature shall be not more than +35℃ and the relative humidity shall be nor more than 90%;
◆  The user shall negotiate with the manufacturer if the ambient air temperature is more than +55℃ or less than -25℃.
◆  The altitude of the installation place shall be not more than 2,000m;
◆  The pollution level of the installation place shall be III;
◆  The installation classification shall be III;
◆  The use classification of the main loop is AC-33B (6le) and the electric motor has mixed load;
◆  Installation conditions:The switch body can be vertically or horizontally arranged and the installation gradient shall be not more than ±22.5°. The controller is panel installation.
◆  Flashover distance:
The flashover distance is 80mm when AC voltage is 400V and 100mm when AC voltage is 690V




Main functions

◆  Indicating present access power state;
◆  Indicating present input working power state;
◆  Indicting fault state (under-voltage, over-voltage and loss phase) + buzz alarm prompt;
◆  Indicating automatic state and manual state (with power-down memory);
◆  Indicating delay process state;
◆  Achieving manual/automatic conversion;
◆  Providing 0~60s adjustable delay for power conversion;
◆  Automatically testing any power fault state (under-voltage, over-voltage and loss phase) and inputting alarm;
◆  Arbitrarily switching A power output or B power input under the manual state;
◆  Optimally selecting A power or B power as the main power.

The control mode can be arbitrarily set:
1.Auto-switch-in, auto-restoring mode;
2.Auto-switch-in, without auto-restoring mode;
3.Generator power supply mode.



GLOQ1B-I Automatic Transfer Switching

Company Profile

SIQI TECHNOLOGY CO.LTD was founded in 2000, it is a modern electric enterprise specializing in producting Automatic Transfer Switch, Load Breaking Switch, Mini Circuit Breaker,Moulded Case Circuit Breaker ,Relays and Digital Panel Meter.


Post Buying Request

  • * Country:Please select country
  • * Title:Please input title
  • * Message:Please input message
  • Your message must be between 20-8000 characters
  • * Your Email Address:Please input Email
  • Your email is also your login ID