• zinc carbonate dynamic calcination kiln

zinc carbonate dynamic calcination kiln

Specifications

 
1.Uniform calcination process
2.NO pollution
3.Accurate temperature control
4.Energy saving
5.High automation level
 

Product Details

Quick Details Parameter

Condition: New : Type: Drum Drying Equipment
Brand Name: lnddft : Model Number: Zn90n
Certification: ISO 9001:2008 : Warranty: 365 days

Description

Flash drying technology of zinc oxide

The current zinc oxide products are mainly active zinc oxide, high purity zinc oxide and nanometer zinc oxide. The dynamic zinc oxide drying and calcination equipment developed by our company is the most advanced process equipment and technology
The traditional production methods of zinc oxide by the zinc carbonate mainly are: one is shaft kiln, and the other is the use of rotary kiln. and by using these equipment is of low activity, high energy consumption, heavy environmental pollution and more materials waste.
Adopting the dynamic drying and calcination process equipment developed can produce the zinc oxide with high activity and purity
The zinc oxide flash drying calciner is of the features of energy-saving, without environmental pollution, high recovery efficiency, small land covering area and high automation level.

 The exhaust which is generated from the material calcination in the dynamic calciner enters into Si De dryer, and the filter cake-shaped zinc carbonate with moisture content from 30 to 50% is fed into the dryer, the powdered zinc carbonate via break up and drying enters into the dynamic calciner, the hot air generated from coal, natural gas or gas enters into calciner to carry out mixed heat transfer with the zinc carbonate in the calciner, upon the heating under hot air of 400~1000 °C, the zinc carbonate, after fast decomposition for a few seconds, is decomposed into zinc oxide, and the decomposed zinc oxide enters into silos via trap

 

Company Profile

 
Liaoning Dongda Powder Engineering Technology Co., Ltd. was established in 1990. More than 50 technological personnel, specialists and professors from Northeastern University have built up the hard core of our scientific research and engineering design. We have obtained many patents in various technologies, such as drying and calcining technologies and powder making technologies, etc. Our equipment has been honored with dozens of awards at the national level.

Our equipment is widely used in industries of chemical, non-metallic, metallurgical, medical, and building with especially successful applications to calcining zinc oxide, nickel oxide, kaolin, molybdenum oxide, vanadium pentoxide and gypsum production. Our equipment has been sold many countries and regions, such as Indonesia, Malaysia, Korea, Vietnam and Taiwan, Russia, Belgium, Italy, etc.

Factory Capability
Our company has a complete system of research, design, manufacture, installation and debugging, after-sales service and its relevant engineering technicians. Our manufacture base occupies an area of 4000 m2 with modern machining equipment and core equipment for a general manufacture company. The annual manufacture capability can reach to more than 100 million yuan RMB in cooperation with our group company.

Domestic Business
We have developed a variety of dryers with flash evaporation technology as the representative. Several products have award the project of China Torch Program and state level new products as well as national patents. More than 400 sets of flash evaporation equipment have been sold to domestic and overseas factories or companies.

We have business relations with more than 500 companies in China and have business relations and technological cooperation with dozen of big chemical companies, such as Shandong Qilu Petrochemical, Jiangxi Jiujiang Petrochemical, Gansu Jinchuan Company, Shenyang Chemical Industries Group, Northeast Pharmaceutical Group, Shanghai Chlorine Alkali Company, Shanghai Baosteel Group Corp., Chengde Vanadium and Titanium Company, Beijing Huaneng Group, Datang Corp Group, etc. Also we have good cooperation relationships with more than ten universities and institutes in China.

International Cooperation
Internationally we conduct business and trade communications with more than ten countries and regions, such as Finland, South Korea, Singapore, Indonesia, Malaysia, Thailand and North Korea, etc.

Culture
DongDa Powder is striving to create a harmonious culture atmosphere in the enterprise, to build up a consolidated upward team spirit, to regularly organize professional training, technical communications to company employees, to send employees to study and learning abroad. We endeavor to make the employees dedicated to our Company; love to work, and to enjoy an cooperative working environment to create outstanding performance.
 
Liaoning Dongda Powder Engineering Technology Co., Ltd. was established in 1990. More than 50 technological personnel, specialists and professors from Northeastern University have built up the hard core of our scientific research and engineering design. We have obtained many patents in various technologies, such as drying and calcining technologies and powder making technologies, etc. Our equipment has been honored with dozens of awards at the national level.

Our equipment is widely used in industries of chemical, non-metallic, metallurgical, medical, and building with especially successful applications to calcining zinc oxide, nickel oxide, kaolin, molybdenum oxide, vanadium pentoxide and gypsum production. Our equipment has been sold many countries and regions, such as Indonesia, Malaysia, Korea, Vietnam and Taiwan, Russia, Belgium, Italy, etc.

Factory Capability
Our company has a complete system of research, design, manufacture, installation and debugging, after-sales service and its relevant engineering technicians. Our manufacture base occupies an area of 4000 m2 with modern machining equipment and core equipment for a general manufacture company. The annual manufacture capability can reach to more than 100 million yuan RMB in cooperation with our group company.

Domestic Business
We have developed a variety of dryers with flash evaporation technology as the representative. Several products have award the project of China Torch Program and state level new products as well as national patents. More than 400 sets of flash evaporation equipment have been sold to domestic and overseas factories or companies.

We have business relations with more than 500 companies in China and have business relations and technological cooperation with dozen of big chemical companies, such as Shandong Qilu Petrochemical, Jiangxi Jiujiang Petrochemical, Gansu Jinchuan Company, Shenyang Chemical Industries Group, Northeast Pharmaceutical Group, Shanghai Chlorine Alkali Company, Shanghai Baosteel Group Corp., Chengde Vanadium and Titanium Company, Beijing Huaneng Group, Datang Corp Group, etc. Also we have good cooperation relationships with more than ten universities and institutes in China.

International Cooperation
Internationally we conduct business and trade communications with more than ten countries and regions, such as Finland, South Korea, Singapore, Indonesia, Malaysia, Thailand and North Korea, etc.

Culture
DongDa Powder is striving to create a harmonious culture atmosphere in the enterprise, to build up a consolidated upward team spirit, to regularly organize professional training, technical communications to company employees, to send employees to study and learning abroad. We endeavor to make the employees dedicated to our Company; love to work, and to enjoy an cooperative working environment to create outstanding performance.
 
Liaoning Dongda Powder Engineering Technology Co., Ltd. was established in 1990. More than 50 technological personnel, specialists and professors from Northeastern University have built up the hard core of our scientific research and engineering design. We have obtained many patents in various technologies, such as drying and calcining technologies and powder making technologies, etc. Our equipment has been honored with dozens of awards at the national level.

Our equipment is widely used in industries of chemical, non-metallic, metallurgical, medical, and building with especially successful applications to calcining zinc oxide, nickel oxide, kaolin, molybdenum oxide, vanadium pentoxide and gypsum production. Our equipment has been sold many countries and regions, such as Indonesia, Malaysia, Korea, Vietnam and Taiwan, Russia, Belgium, Italy, etc.

Factory Capability
Our company has a complete system of research, design, manufacture, installation and debugging, after-sales service and its relevant engineering technicians. Our manufacture base occupies an area of 4000 m2 with modern machining equipment and core equipment for a general manufacture company. The annual manufacture capability can reach to more than 100 million yuan RMB in cooperation with our group company.

Domestic Business
We have developed a variety of dryers with flash evaporation technology as the representative. Several products have award the project of China Torch Program and state level new products as well as national patents. More than 400 sets of flash evaporation equipment have been sold to domestic and overseas factories or companies.

We have business relations with more than 500 companies in China and have business relations and technological cooperation with dozen of big chemical companies, such as Shandong Qilu Petrochemical, Jiangxi Jiujiang Petrochemical, Gansu Jinchuan Company, Shenyang Chemical Industries Group, Northeast Pharmaceutical Group, Shanghai Chlorine Alkali Company, Shanghai Baosteel Group Corp., Chengde Vanadium and Titanium Company, Beijing Huaneng Group, Datang Corp Group, etc. Also we have good cooperation relationships with more than ten universities and institutes in China.

International Cooperation
Internationally we conduct business and trade communications with more than ten countries and regions, such as Finland, South Korea, Singapore, Indonesia, Malaysia, Thailand and North Korea, etc.

Culture
DongDa Powder is striving to create a harmonious culture atmosphere in the enterprise, to build up a consolidated upward team spirit, to regularly organize professional training, technical communications to company employees, to send employees to study and learning abroad. We endeavor to make the employees dedicated to our Company; love to work, and to enjoy an cooperative working environment to create outstanding performance.
 
Liaoning Dongda Powder Engineering Technology Co., Ltd. was established in 1990. More than 50 technological personnel, specialists and professors from Northeastern University have built up the hard core of our scientific research and engineering design. We have obtained many patents in various technologies, such as drying and calcining technologies and powder making technologies, etc. Our equipment has been honored with dozens of awards at the national level.

Our equipment is widely used in industries of chemical, non-metallic, metallurgical, medical, and building with especially successful applications to calcining zinc oxide, nickel oxide, kaolin, molybdenum oxide, vanadium pentoxide and gypsum production. Our equipment has been sold many countries and regions, such as Indonesia, Malaysia, Korea, Vietnam and Taiwan, Russia, Belgium, Italy, etc.

Factory Capability
Our company has a complete system of research, design, manufacture, installation and debugging, after-sales service and its relevant engineering technicians. Our manufacture base occupies an area of 4000 m2 with modern machining equipment and core equipment for a general manufacture company. The annual manufacture capability can reach to more than 100 million yuan RMB in cooperation with our group company.

Domestic Business
We have developed a variety of dryers with flash evaporation technology as the representative. Several products have award the project of China Torch Program and state level new products as well as national patents. More than 400 sets of flash evaporation equipment have been sold to domestic and overseas factories or companies.

We have business relations with more than 500 companies in China and have business relations and technological cooperation with dozen of big chemical companies, such as Shandong Qilu Petrochemical, Jiangxi Jiujiang Petrochemical, Gansu Jinchuan Company, Shenyang Chemical Industries Group, Northeast Pharmaceutical Group, Shanghai Chlorine Alkali Company, Shanghai Baosteel Group Corp., Chengde Vanadium and Titanium Company, Beijing Huaneng Group, Datang Corp Group, etc. Also we have good cooperation relationships with more than ten universities and institutes in China.

International Cooperation
Internationally we conduct business and trade communications with more than ten countries and regions, such as Finland, South Korea, Singapore, Indonesia, Malaysia, Thailand and North Korea, etc.

Culture
DongDa Powder is striving to create a harmonious culture atmosphere in the enterprise, to build up a consolidated upward team spirit, to regularly organize professional training, technical communications to company employees, to send employees to study and learning abroad. We endeavor to make the employees dedicated to our Company; love to work, and to enjoy an cooperative working environment to create outstanding performance.
 
Liaoning Dongda Powder Engineering Technology Co., Ltd. was established in 1990. More than 50 technological personnel, specialists and professors from Northeastern University have built up the hard core of our scientific research and engineering design. We have obtained many patents in various technologies, such as drying and calcining technologies and powder making technologies, etc. Our equipment has been honored with dozens of awards at the national level.

Our equipment is widely used in industries of chemical, non-metallic, metallurgical, medical, and building with especially successful applications to calcining zinc oxide, nickel oxide, kaolin, molybdenum oxide, vanadium pentoxide and gypsum production. Our equipment has been sold many countries and regions, such as Indonesia, Malaysia, Korea, Vietnam and Taiwan, Russia, Belgium, Italy, etc.

Factory Capability
Our company has a complete system of research, design, manufacture, installation and debugging, after-sales service and its relevant engineering technicians. Our manufacture base occupies an area of 4000 m2 with modern machining equipment and core equipment for a general manufacture company. The annual manufacture capability can reach to more than 100 million yuan RMB in cooperation with our group company.

Domestic Business
We have developed a variety of dryers with flash evaporation technology as the representative. Several products have award the project of China Torch Program and state level new products as well as national patents. More than 400 sets of flash evaporation equipment have been sold to domestic and overseas factories or companies.

We have business relations with more than 500 companies in China and have business relations and technological cooperation with dozen of big chemical companies, such as Shandong Qilu Petrochemical, Jiangxi Jiujiang Petrochemical, Gansu Jinchuan Company, Shenyang Chemical Industries Group, Northeast Pharmaceutical Group, Shanghai Chlorine Alkali Company, Shanghai Baosteel Group Corp., Chengde Vanadium and Titanium Company, Beijing Huaneng Group, Datang Corp Group, etc. Also we have good cooperation relationships with more than ten universities and institutes in China.

International Cooperation
Internationally we conduct business and trade communications with more than ten countries and regions, such as Finland, South Korea, Singapore, Indonesia, Malaysia, Thailand and North Korea, etc.

Culture
DongDa Powder is striving to create a harmonious culture atmosphere in the enterprise, to build up a consolidated upward team spirit, to regularly organize professional training, technical communications to company employees, to send employees to study and learning abroad. We endeavor to make the employees dedicated to our Company; love to work, and to enjoy an cooperative working environment to create outstanding performance.

Liaoning Dongda Powder Engineering Technology Co., Ltd.

 

Post Buying Request

  • * Title:Please input title
  • * Message:Please input message
  • Your message must be between 20-8000 characters
  • * Your Email Address:Please input Email
  • Your email is also your login ID