1.Characteristics of mini milk pasteurizer machine
- Tube size 13mm
- thimble's materials:SUS304
- Built-in jet mixing heater
- Built-in two extra high pressure high temperature magnetic pump
- System is equipped with 5 litre capacity material tank,
- Through the particles:Max 0.8mm
- Electric: Three phase 380 v 5lines , grounding,
- Demension: 1200(H)*1100(L)*2108(W)mm
- Weight 220KG
This UHT system, duringJet mixing heating,heating the liquid material to 100℃-140℃. When heating, Heavy pressure mixed(The heat conduction oil system pressure mix injection line delay sterilization).Rebirth period maximum temperature is 150℃.3-20L per hour.The coolign water cooling to the normal temperature. When the flow rate of the product to maintain the temperature is 20L/hour.
All of the devices, controllers, valve parts and components are clearly marked with the respective function.
All contact with the product material tube, etc. Are all made of the food grade stainless steel SUS304. The host body and electric cabinet adopts stainless steel 304. The control panel cover and back in closing, narrowed class can reach IP65.
The device is equipped with a temperature tube. All the joint line can provide such as 5 s, 10 s, 15s.
2. Milk pasteurizer machine Technical parameters:
||three phase current 380V,50HZ,per phase 25A
||Preheat to 100 °C(50L/h)
|The heat conduction oil generator(withstand voltage)
The drum type heater 8×1.6mpa
|Tubular material pathways
||From the aperture for DN25 food-grade stainless steel tube to enter,The inner surface precision of less than 10 microns
1 renewable period (preheating section)
2 Period of heating(Sterilization period)
3 Section of the cooling
4 SIP Section
|Material tube under the biggest pressure