- Place of Origin: Liaoning, China (Mainland)
- Brand Name: DCIT
- Model Number: WAS-2320
- Power: 3.0kw
- Water depth: 2200mm
- Tank height: 2400mm
- Single aerator capacity: 70m3/hr
Packaging & Delivery
||standard export packing
||on customers requirement
wastewater aeration system is composed of motor,motor base,
coupler,intake shaft,aerator cylinder,grease seal,mechanical seal
I. Cavitation Aerator is a patented products developed based on years of richful experience in the filed of effluent treatment. It is widely used by high-rate aeration of flotation and flotation tank in petroleum, petrification, textile, food, paper making, dyes and pigments,brewing,pharmacy, leather making and slaughtering industries wastewater treatment and municipal sewage treatment.
II. Cavitation Aerator is composed of motor, motor base, coupler,intake shaft, aerator cylinder, grease seal, mechanical seal and impeller outlet. Aerator cylinder can be made of carbon plastic spray and stainless steel.
III. cavitation aerator bubble is formed through motor high speed revolution, negative pressure will occur when mixing the waterflow, Then inhaling air through air intake;the air is inhaled into the water when pass through central shaft, rotates in the water after passing impeller, then formed fine air bubbles with diameter from 5um---15um. Fine bubbles hold solid suspension in the water rising to the surface of the water, then formed scums, fine air bubbles will last 50~60 seconds in the water.
IV. Cavitation Aerator Features
l Large aeration volume
l high speed rising of fine bubbles, fine bubbles, high density
l simple maintainance,lower power consumption
l little noise,long life span
l no need air compressor, dissolved air vessel.
l Single or multi aerator are all available based on customers application situation.single aerator
has the feature of large aeration volume,fine bubbles, high density.