USE THE TDS METER TO:
*Check the performance of your water filter
*Check for hardness(1 grain=17ppm)
*Make sure you always drink pure water
Application to family, school, lab, hike outerside
*Hold function: Saves measurements for convenient reading and recording.
*Auto-off function: Turns off meter after 10minutes of non-use to conserve batteries.
*Dual Range: Measures from 0-999ppm,with a resolution of 1 ppm.
From1000 to 9,990ppm,the resolution is 10ppm,indicated by drinking
*10 symbol,Factory calibrated.
Instruction for the TDS meter
1.Remove the protective cap
2.Turn the TDS meter on.
3.Immerse the meter into the water/solution up to the maximum immersion level 1(2″)
4.Waiting until the display stabillizes,the TDS meter automatically variations Once the readout is stabillized(30 to 45 seconds).press the hold button to save reading.
5.After usage,shake off water from your meter or wipe it with a tissue.
Do not drop the entire TDS meter in water or dip beyond the maximum immersion level.This until is not water-tight and is not covered under the warranty if water enters the unit.
Do not store the TDS meter under high temperature or direct sunlight.This will sshorten the life-span of the product and potentially void the warranty.