Driving device: Apply gimbaled frequency conversion control on speed reducing system and use electric lifting instead of conventional hydraulic lifting, which results to more convenient, homogeneous and gentle driving, as well as less maintenance, failures and leakage.
Multi-area ring-pipe gathering system: configuring with honeycomb wort gathering connection, the effluent path of wort can be more accordant with ring-pipe gathering system. According to its concentration control technique, this system can balance the concentration of the inside and outside grains layer, especially when in the grains washing step, it guarantees the uniformity of the whole grains layer in order to achieve the highest rate of yield with Lehui's characteristic..
Grains raking and discharging: well combined raker and blade will not have the trouble of blades pulling off with its rational structure and also can reduce repairing, it can be used as raker when running forward and can be used as grains remover while running reverse.
High-position principal axis seal: can solve the problem of leakage and pollution completely.
False bottom: Lehui-made 4mm grooving false bottom, improves a lot in smoothness and cleanness.
Control: Automatic on-line control through control units of pressure, flow, level and turbidity meter etc.
On March 18, 1991, Huizhou Lehui Industry Co., Ltd. was co-founded by Mr Lai Yunlai (a.k.a. Vincent Lai) and Mr.
Huang Yuening (a.k.a. William Huang) in Huizhou City, Guangdong, which has developed into the largest manufacturer of beer and beverage equipments in China.
Lehui (Group) has over 1, 100 employees, including more than 230 technicians.
Ningbo Lehui has been among the top ten taxpayers of the local government for many consecutive years.
Although put into production for only 2 years, Nanjing Lehui has also become a major taxpayer of Jiangning Economic & Technological Development Zone, Nanjing.
The main manufacturing bases of Lehui are located in Xizhou Town, Xiangshan County, Ningbo City and Jiangning Economic & Technological Development Zone, Nanjing City.
The Ningbo Factory covers an area of 100,000 sqm, including 45, 000 sqm processing workshops.
A new factory is under construction at Ningbo Port, which will cover an area of 80, 000 sqm, with the workshops covering 40, 000 sqm.
The new factory is expected to be put into production in 2012. The Nanjing Factory covers an area of 260,000 sqm, with the phase 1 workshop covering 50, 000 sqm.
The second phase has been commenced and is expected to be completed in 2013.