• Dalian Hipeak ultrasonic flowmeter,flow meter/4-20mA and rs485 hot water meter(TDS-100F)

Dalian Hipeak ultrasonic flowmeter,flow meter/4-20mA and rs485 hot water meter(TDS-100F)

ultrasonic flow meter/hot water meter
1 Accurancy 1%
2 With RS485, RS232,4-20mA
3 CE and ISO
4 MODBUS,M-BUS

Product Details

Quick Details

Description

Technology features:

 

1:operating power :AC 85—264V or isolation DC 24V

2:current: 50mA(under the condition of connection without keyboard display and alarm of beeper)

3:signal output :one channel standard isolation RS485 output

            One channel isolation isolation 4-20mA or 0-20mA active output.

            One channel OCT output(programmed between the pulse width(6-1000ms),default before out of factory (200ms))

            One channel isolation relay output,with positive,negative,net accumulation pulses and different alarm signals.

4:signal input: two channel three wire system PT100 platinum resistor input loop,to make calorimeter has the function of displaying heat quantity.

             Three channel 4-20mA input optional,accuracy:0.1%,has the ability to input the signals of pressure, liquid level, temperature and so on.

5::display:2*20 backlit LCD(Chinese and English optional)

6:operating:4*4 tactile keypad or magnetic 4 keypads operating(F4 mainframe)

7:other functions:automatic memory the positive,negative,net totaliser or flow rate and thermal energy of the last 512 days,128 months,10years

             Automatic memory the time of power turning on and off and flow rate of the last 30 times, realize to compensate by hand or automatically,read the datas through Modbus communication protocol.  

8:protection level:mainframe:IP65,IP68(F4 mainframe),transducer:IP:68

9:ex-proof:EXd two BT4(TDS-100F2 type)

10:transducer: clamp-on style,insertion style,flanged pipe style.

 

 

Optional accessory:

 

1:clamp-on transducer(clamp on  S2H style,clamp on M2H style or clamp on L2H style)

2:insertion transducer(standard insertion B,cement insertion B)

3:flanged pipe style transducer(hygienic style, Π style,standard style)

 

4:PT100 3 wire system platinum resistor(one pair,used for calorimeter)

5:SEYV75-2 style special shielded twisted pair cable

6:fixture(applied with installation of transducers on cast iron,GRP,PVC,etc. that can not be welded directly.

7:ultrasonic thickness gauge(measure the thickness of pipe,reduce error,increase accuracy)    

 

Item

Performance, Parameters

Accuracy

Better than ±1.0 %

Repeatability

0.2%

Velocity

±32m/s

Measurement Period

0.5S

Measurement

Principle

Transit-time measurement principle

Display

LCD with backlight. 2x20 letters.

Keypad

4x4-key membrane keypad with tactile feedback

Input

Five channel 4-20mA current inputs for signals such as temperature, pressure, liquid level, and etc.. Accuracy 0.1%.

Two of the five input channels are wired to terminal blocks. The remaining three channels are optional.

Outputs

Analogue output: 4-20mA or 0-20mA current output. Impedance 01kΩ.

Isolated OCT output: for frequency output (0-9,999Hz), alarm driver, or totaliser pulse output, ON/OFF control, etc.

Relay output 1A@125VAC or 2A@30VDC. For ON/OFF control, alarm driver, totaliser output, etc.

Internal Alarm (Buzzer): user programmable.

External Alarm Driver: alarm signal can be transmitted to Relay or OCT output terminals to drive an external alarm.  

RS-232 serial port.

Others

Capable of offline compensation for flow totaliser, automatic / manual selectable. Self-diagnosis.

Automatically record the following information:

The totaliser data of the last 64 days / 64 months / 5 years;

The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation

The instrument working status of the last 64 days

Power

AC: 220VDC: 8~36VDC or AC7-30V

Power Consumption

< 2W

Work time

Continuous

Environment

Temperature

-30-80 Degrees Celsius

Environment

Humidity

85% RH

Company Profile

Dalian Hipeak Instruments Development Co., Ltd. was established in 1996. Our firm is a high technology company which specializes in the design, manufacture and development.

TDS-100 series of ultrasonic flow meters / calorimeters / water meters are widely used in oil, chemical, metallurgy, water conservancy, heating, and boiler industries. Our products are exported to the United States, Europe, Australia, Japan, Korea and Southeast Asia. We have achieved a sales volume of over fifteen thousand sets per year.

DL

 

Post Buying Request

  • * Title:Please input title
  • * Message:Please input message
  • Your message must be between 20-8000 characters
  • * Your Email Address:Please input Email
  • Your email is also your login ID