A.Brief IntroductionLt-2C2L reaches around 2000BPH for 350ML bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts and valve :smc(japan)c).Other electric parts are all world-famous brand
C.Machine Features:C.1. Stable performance with advanced PLC. C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Lu Tai is one of the important and professional manufacturer of the PET stretch blow molding machine. blowing mould. cap mould and PET Preform mould in china. we have dozen of years of the blow molding machine manufacturing experience.gathering with several years R&D experience on plastic machinery. Lu tai has one unit of perfect complete after sale service system.
At the presently design and manufacturing artificial process.Lu tai grasps the essence of the plastic machinery from the home and abroad. and improved with self design and creation. We had already made out one group of quipment which is with higher performance. lower power consumption.more efficiency.